W4MQ Client Software Downloads

If this is your first download of the WEBTRANSCEIVER Control OP software for the PC, then you MUST first download and install the FULL program version which is webtransceiver6000.exe. THEN download and install the update to get the latest available version of the client software which is updateclient6002006.exe.

IMPORTANT: 
IF YOU CANNOT ACCESS W4MQ then go to SETUP->LOGIN INFO and erase the IP info for W4MQ and  re-enter w4mq.no-ip.com

Virtual Comm Port Driver for WebXCVR:

This software is NOT needed to run a typical IRB setup. It is ONLY used when you need to link to a device bot supported in the IRB software. This package provides a link between a serial port device and whatever software that controls it over a network. Again, you do NOT normally need this package for most common setups.

Download n8vbvcom_install_222.exe below

You can find the latest version of this driver and more information on it here:
http://www.philcovington.com/SDR_arch.html

Server (HOST) Downloads

IRBHOST Version
6.002

PROVIDES INTERFACE FOR KENWOOD TS2000, TS480, AND TS570
RADIOS

IMPORTANT     Read documentation
(IRBHost.pdf below) first!!

·       REQUIRES WINDOWS XP
(May work under Windows 2000)

THE FULL DOWNLOAD OF VERSION 6 MUST BE INSTALLED AT LEAST ONCE -- EVEN IF YOU HAVE VERSION 5 INSTALLED

UPDATE ONLY DOWNLOAD  
-- updateserver6002006.exe

FULL DOWNLOAD
-- fullserver6002003.exe

FOLLOWING THE INSTALLATION, YOU WILL BE REQUESTED TO SETUP THE
CONFIGURATION FILE. PLEASE CHANGE THE CALLSIGN INFORMATION AND THE DETAILS
ABOUT HOW YOUR RADIO IS INTERFACED TO THE COMPUTER. WHEN ALL ELSE
FAILS READ THE DOCUMENTATION.

IP Sound file - IPS-v0.57a-Finale.zip

I've found the latest version of the IP Sound utility and posted a copy below for those of you looking for it. It's sort of hard to find and I hope that posting it here might make ie a bit easier to find.

DXLabs software

Use the DXLabs Launcher to install  the Commander software. Simply use the defaults programmed into the Launcher. If you run the Commander software BEFORE you start the IRBHost program, IRBHost should find that Commander is already running if you have the ini file configured properly.

Click on the appropriate attachment link below to download any of the available items.